AMD Athlon II X4 600e vs AMD EPYC 73F3
Last updated:
CPU comparison with benchmarks
|
 |
|
| AMD Athlon II X4 600e | AMD EPYC 73F3 | |
CPU comparisonAMD Athlon II X4 600e or AMD EPYC 73F3 - which processor is faster? In this comparison we look at the differences and analyze which of these two CPUs is better. We compare the technical data and benchmark results.
The AMD Athlon II X4 600e has 4 cores with 4 threads and clocks with a maximum frequency of 2.20 GHz. Up to 16 GB of memory is supported in 2 memory channels. The AMD Athlon II X4 600e was released in Q3/2009. The AMD EPYC 73F3 has 16 cores with 32 threads and clocks with a maximum frequency of 4.00 GHz. The CPU supports up to 4096 GB of memory in 8 memory channels. The AMD EPYC 73F3 was released in Q1/2021. |
||
| AMD Athlon II (52) | Family | AMD EPYC (129) |
| AMD Athlon II X4 (Propus) (10) | CPU group | AMD EPYC 7003 (29) |
| 1 | Generation | 3 |
| Propus | Architecture | Milan (Zen 3) |
| Desktop / Server | Segment | Desktop / Server |
| -- | Predecessor | -- |
| -- | Successor | -- |
|
|
||
CPU Cores and Base FrequencyThe AMD Athlon II X4 600e has 4 CPU cores and can calculate 4 threads in parallel. The clock frequency of the AMD Athlon II X4 600e is 2.20 GHz while the AMD EPYC 73F3 has 16 CPU cores and 32 threads can calculate simultaneously. The clock frequency of the AMD EPYC 73F3 is at 3.50 GHz (4.00 GHz). |
||
| AMD Athlon II X4 600e | Characteristic | AMD EPYC 73F3 |
| 4 | Cores | 16 |
| 4 | Threads | 32 |
| normal | Core architecture | normal |
| No | Hyperthreading | Yes |
| No | Overclocking ? | No |
| 2.20 GHz | Frequency | 3.50 GHz |
| -- | Turbo Frequency (1 Core) | 4.00 GHz |
| -- | Turbo Frequency (All Cores) | 3.80 GHz |
Memory & PCIeThe AMD Athlon II X4 600e can use up to 16 GB of memory in 2 memory channels. The maximum memory bandwidth is 21.3 GB/s. The AMD EPYC 73F3 supports up to 4096 GB of memory in 8 memory channels and achieves a memory bandwidth of up to 204.8 GB/s. |
||
| AMD Athlon II X4 600e | Characteristic | AMD EPYC 73F3 |
| DDR3-1333 | Memory | DDR4-3200 |
| 16 GB | Max. Memory | 4096 GB |
| 2 (Dual Channel) | Memory channels | 8 (Octa Channel) |
| 21.3 GB/s | Max. Bandwidth | 204.8 GB/s |
| No | ECC | Yes |
| 2.00 MB | L2 Cache | -- |
| -- | L3 Cache | 256.00 MB |
| 2.0 | PCIe version | 4.0 |
| -- | PCIe lanes | 128 |
| -- | PCIe Bandwidth | 252.0 GB/s |
Thermal ManagementThe thermal design power (TDP for short) of the AMD Athlon II X4 600e is 45 W, while the AMD EPYC 73F3 has a TDP of 240 W. The TDP specifies the necessary cooling solution that is required to cool the processor sufficiently. |
||
| AMD Athlon II X4 600e | Characteristic | AMD EPYC 73F3 |
| 45 W | TDP (PL1 / PBP) | 240 W |
| -- | TDP (PL2) | -- |
| -- | TDP up | -- |
| -- | TDP down | 225 W |
| -- | Tjunction max. | -- |
Technical detailsThe AMD Athlon II X4 600e is manufactured in 45 nm and has 2.00 MB cache. The AMD EPYC 73F3 is manufactured in 7 nm and has a 256.00 MB cache. |
||
| AMD Athlon II X4 600e | Characteristic | AMD EPYC 73F3 |
| 45 nm | Technology | 7 nm |
| Unknown | Chip design | Chiplet |
| x86-64 (64 bit) | Instruction set (ISA) | x86-64 (64 bit) |
| MMX, 3DNow!, SSE3, SSE4a | ISA extensions | SSE4a, SSE4.1, SSE4.2, AVX2, FMA3 |
| AM3 | Socket | SP3 |
| AMD-V | Virtualization | AMD-V, SVM |
| No | AES-NI | Yes |
| Windows 10, Linux | Operating systems | Windows 10, Linux |
| Q3/2009 | Release date | Q1/2021 |
| -- | Release price | 3521 $ |
| show more data | show more data | |
|
4C 4T @ 2.20 GHz buy now on Amazon and save!
16C 32T @ 3.50 GHz (4.00 GHz) buy now on Amazon and save!
|
||
Rate these processors
Average performance in benchmarks
⌀ Single core performance in 1 CPU benchmarks
⌀ Multi core performance in 2 CPU benchmarks
Geekbench 5, 64bit (Single-Core)
Geekbench 5 is a cross plattform benchmark that heavily uses the systems memory. A fast memory will push the result a lot. The single-core test only uses one CPU core, the amount of cores or hyperthreading ability doesn't count.
|
AMD Athlon II X4 600e
4C 4T @ 2.20 GHz |
||
|
AMD EPYC 73F3
16C 32T @ 4.00 GHz |
||
Geekbench 5, 64bit (Multi-Core)
Geekbench 5 is a cross plattform benchmark that heavily uses the systems memory. A fast memory will push the result a lot. The multi-core test involves all CPU cores and taks a big advantage of hyperthreading.
|
|
AMD Athlon II X4 600e
4C 4T @ 2.20 GHz |
||
|
|
AMD EPYC 73F3
16C 32T @ 3.80 GHz |
||
Estimated results for PassMark CPU Mark
Some of the CPUs listed below have been benchmarked by CPU-monkey. However the majority of CPUs have not been tested and the results have been estimated by a CPU-monkey’s secret proprietary formula. As such they do not accurately reflect the actual Passmark CPU mark values and are not endorsed by PassMark Software Pty Ltd.
|
|
AMD Athlon II X4 600e
4C 4T @ 2.20 GHz |
||
|
|
AMD EPYC 73F3
16C 32T @ 3.80 GHz |
||
Cinebench R23 (Single-Core)
Cinebench R23 is the successor of Cinebench R20 and is also based on the Cinema 4 Suite. Cinema 4 is a worldwide used software to create 3D forms. The single-core test only uses one CPU core, the amount of cores or hyperthreading ability doesn't count.
|
|
AMD Athlon II X4 600e
4C 4T @ 2.20 GHz |
||
|
|
AMD EPYC 73F3
16C 32T @ 4.00 GHz |
||
Cinebench R23 (Multi-Core)
Cinebench R23 is the successor of Cinebench R20 and is also based on the Cinema 4 Suite. Cinema 4 is a worldwide used software to create 3D forms. The multi-core test involves all CPU cores and taks a big advantage of hyperthreading.
|
|
AMD Athlon II X4 600e
4C 4T @ 2.20 GHz |
||
|
|
AMD EPYC 73F3
16C 32T @ 3.80 GHz |
||
Cinebench R20 (Single-Core)
Cinebench R20 is the successor of Cinebench R15 and is also based on the Cinema 4 Suite. Cinema 4 is a worldwide used software to create 3D forms. The single-core test only uses one CPU core, the amount of cores or hyperthreading ability doesn't count.
|
|
AMD Athlon II X4 600e
4C 4T @ 2.20 GHz |
||
|
|
AMD EPYC 73F3
16C 32T @ 4.00 GHz |
||
Cinebench R20 (Multi-Core)
Cinebench R20 is the successor of Cinebench R15 and is also based on the Cinema 4 Suite. Cinema 4 is a worldwide used software to create 3D forms. The multi-core test involves all CPU cores and taks a big advantage of hyperthreading.
|
|
AMD Athlon II X4 600e
4C 4T @ 2.20 GHz |
||
|
|
AMD EPYC 73F3
16C 32T @ 3.80 GHz |
||
Cinebench R15 (Single-Core)
Cinebench R15 is the successor of Cinebench 11.5 and is also based on the Cinema 4 Suite. Cinema 4 is a worldwide used software to create 3D forms. The single-core test only uses one CPU core, the amount of cores or hyperthreading ability doesn't count.
|
|
AMD Athlon II X4 600e
4C 4T @ 2.20 GHz |
||
|
|
AMD EPYC 73F3
16C 32T @ 4.00 GHz |
||
Cinebench R15 (Multi-Core)
Cinebench R15 is the successor of Cinebench 11.5 and is also based on the Cinema 4 Suite. Cinema 4 is a worldwide used software to create 3D forms. The multi-core test involves all CPU cores and taks a big advantage of hyperthreading.
|
|
AMD Athlon II X4 600e
4C 4T @ 2.20 GHz |
||
|
|
AMD EPYC 73F3
16C 32T @ 3.80 GHz |
||
Devices using this processor |
|
| AMD Athlon II X4 600e | AMD EPYC 73F3 |
| Unknown | Unknown |
Popular comparisons containing this CPUs
back to index
