Intel Xeon E5-2630L v4 vs AMD EPYC 7252
Last updated:
CPU comparison with benchmarks
|
 |
|
| Intel Xeon E5-2630L v4 | AMD EPYC 7252 | |
CPU comparisonIn this CPU comparison, we compare the Intel Xeon E5-2630L v4 and the AMD EPYC 7252 and use benchmarks to check which processor is faster.
We compare the Intel Xeon E5-2630L v4 10 core processor released in Q1/2016 with the AMD EPYC 7252 which has 8 CPU cores and was introduced in Q3/2019. |
||
| Intel Xeon E5 (71) | Family | AMD EPYC (129) |
| Intel Xeon E5 v4 (24) | CPU group | AMD EPYC 7002 (24) |
| 6 | Generation | 2 |
| Broadwell E | Architecture | Rome (Zen 2) |
| Desktop / Server | Segment | Desktop / Server |
| Intel Xeon E5-2630L v3 | Predecessor | -- |
| -- | Successor | -- |
|
|
||
CPU Cores and Base FrequencyThe Intel Xeon E5-2630L v4 is a 10 core processor with a clock frequency of 1.80 GHz (2.90 GHz). The processor can compute 20 threads at the same time. The AMD EPYC 7252 clocks with 3.10 GHz (3.20 GHz), has 8 CPU cores and can calculate 16 threads in parallel. |
||
| Intel Xeon E5-2630L v4 | Characteristic | AMD EPYC 7252 |
| 10 | Cores | 8 |
| 20 | Threads | 16 |
| normal | Core architecture | normal |
| Yes | Hyperthreading | Yes |
| No | Overclocking ? | No |
| 1.80 GHz | Frequency | 3.10 GHz |
| 2.90 GHz | Turbo Frequency (1 Core) | 3.20 GHz |
| 2.20 GHz | Turbo Frequency (All Cores) | 3.20 GHz |
Memory & PCIeUp to 1536 GB of memory in a maximum of 4 memory channels is supported by the Intel Xeon E5-2630L v4, while the AMD EPYC 7252 supports a maximum of GB of memory with a maximum memory bandwidth of 51.2 GB/s enabled. |
||
| Intel Xeon E5-2630L v4 | Characteristic | AMD EPYC 7252 |
| DDR4-2133 | Memory | DDR4-3200 |
| 1536 GB | Max. Memory | |
| 4 (Quad Channel) | Memory channels | 8 (Octa Channel) |
| 68.2 GB/s | Max. Bandwidth | 51.2 GB/s |
| Yes | ECC | Yes |
| -- | L2 Cache | -- |
| 25.00 MB | L3 Cache | 64.00 MB |
| 3.0 | PCIe version | 4.0 |
| 40 | PCIe lanes | 128 |
| 39.4 GB/s | PCIe Bandwidth | 252.0 GB/s |
Thermal ManagementThe Intel Xeon E5-2630L v4 has a TDP of 55 W. The TDP of the AMD EPYC 7252 is 120 W. System integrators use the TDP of the processor as a guide when dimensioning the cooling solution. |
||
| Intel Xeon E5-2630L v4 | Characteristic | AMD EPYC 7252 |
| 55 W | TDP (PL1 / PBP) | 120 W |
| -- | TDP (PL2) | -- |
| -- | TDP up | -- |
| -- | TDP down | -- |
| -- | Tjunction max. | -- |
Technical detailsThe Intel Xeon E5-2630L v4 has 25.00 MB cache and is manufactured in 14 nm. The cache of AMD EPYC 7252 is at 64.00 MB. The processor is manufactured in 7 nm. |
||
| Intel Xeon E5-2630L v4 | Characteristic | AMD EPYC 7252 |
| 14 nm | Technology | 7 nm |
| Monolithic | Chip design | Chiplet |
| x86-64 (64 bit) | Instruction set (ISA) | x86-64 (64 bit) |
| SSE4.1, SSE4.2, AVX2 | ISA extensions | SSE4a, SSE4.1, SSE4.2, AVX2, FMA3 |
| LGA 2011-3 | Socket | SP3 |
| VT-x, VT-x EPT, VT-d | Virtualization | AMD-V, SVM |
| Yes | AES-NI | Yes |
| Windows 10, Linux | Operating systems | Windows 10, Linux |
| Q1/2016 | Release date | Q3/2019 |
| 610 $ | Release price | 790 $ |
| show more data | show more data | |
|
10C 20T @ 1.80 GHz (2.90 GHz) buy now on Amazon and save!
8C 16T @ 3.10 GHz (3.20 GHz) buy now on Amazon and save!
|
||
Rate these processors
Average performance in benchmarks
⌀ Single core performance in 1 CPU benchmarks
⌀ Multi core performance in 2 CPU benchmarks
Geekbench 5, 64bit (Single-Core)
Geekbench 5 is a cross plattform benchmark that heavily uses the systems memory. A fast memory will push the result a lot. The single-core test only uses one CPU core, the amount of cores or hyperthreading ability doesn't count.
|
Intel Xeon E5-2630L v4
10C 20T @ 2.90 GHz |
||
|
AMD EPYC 7252
8C 16T @ 3.20 GHz |
||
Geekbench 5, 64bit (Multi-Core)
Geekbench 5 is a cross plattform benchmark that heavily uses the systems memory. A fast memory will push the result a lot. The multi-core test involves all CPU cores and taks a big advantage of hyperthreading.
|
|
Intel Xeon E5-2630L v4
10C 20T @ 2.20 GHz |
||
|
|
AMD EPYC 7252
8C 16T @ 3.20 GHz |
||
Estimated results for PassMark CPU Mark
Some of the CPUs listed below have been benchmarked by CPU-monkey. However the majority of CPUs have not been tested and the results have been estimated by a CPU-monkey’s secret proprietary formula. As such they do not accurately reflect the actual Passmark CPU mark values and are not endorsed by PassMark Software Pty Ltd.
|
|
Intel Xeon E5-2630L v4
10C 20T @ 2.20 GHz |
||
|
|
AMD EPYC 7252
8C 16T @ 3.20 GHz |
||
Geekbench 6 (Single-Core)
Geekbench 6 is a benchmark for modern computers, notebooks and smartphones. What is new is an optimized utilization of newer CPU architectures, e.g. based on the big.LITTLE concept and combining CPU cores of different sizes. The single-core benchmark only evaluates the performance of the fastest CPU core, the number of CPU cores in a processor is irrelevant here.
|
|
Intel Xeon E5-2630L v4
10C 20T @ 2.90 GHz |
||
|
|
AMD EPYC 7252
8C 16T @ 3.20 GHz |
||
Geekbench 6 (Multi-Core)
Geekbench 6 is a benchmark for modern computers, notebooks and smartphones. What is new is an optimized utilization of newer CPU architectures, e.g. based on the big.LITTLE concept and combining CPU cores of different sizes. The multi-core benchmark evaluates the performance of all of the processor's CPU cores. Virtual thread improvements such as AMD SMT or Intel's Hyper-Threading have a positive impact on the benchmark result.
|
|
Intel Xeon E5-2630L v4
10C 20T @ 2.20 GHz |
||
|
|
AMD EPYC 7252
8C 16T @ 3.20 GHz |
||
Cinebench R20 (Single-Core)
Cinebench R20 is the successor of Cinebench R15 and is also based on the Cinema 4 Suite. Cinema 4 is a worldwide used software to create 3D forms. The single-core test only uses one CPU core, the amount of cores or hyperthreading ability doesn't count.
|
|
Intel Xeon E5-2630L v4
10C 20T @ 2.90 GHz |
||
|
|
AMD EPYC 7252
8C 16T @ 3.20 GHz |
||
Cinebench R15 (Single-Core)
Cinebench R15 is the successor of Cinebench 11.5 and is also based on the Cinema 4 Suite. Cinema 4 is a worldwide used software to create 3D forms. The single-core test only uses one CPU core, the amount of cores or hyperthreading ability doesn't count.
|
|
Intel Xeon E5-2630L v4
10C 20T @ 2.90 GHz |
||
|
|
AMD EPYC 7252
8C 16T @ 3.20 GHz |
||
Cinebench R15 (Multi-Core)
Cinebench R15 is the successor of Cinebench 11.5 and is also based on the Cinema 4 Suite. Cinema 4 is a worldwide used software to create 3D forms. The multi-core test involves all CPU cores and taks a big advantage of hyperthreading.
|
|
Intel Xeon E5-2630L v4
10C 20T @ 2.20 GHz |
||
|
|
AMD EPYC 7252
8C 16T @ 3.20 GHz |
||
Devices using this processor |
|
| Intel Xeon E5-2630L v4 | AMD EPYC 7252 |
| Unknown | Unknown |
Popular comparisons containing this CPUs
back to index
