Intel Pentium E5300 vs AMD Phenom II X4 940
Last updated:
CPU comparison with benchmarks
|
 |
|
| Intel Pentium E5300 | AMD Phenom II X4 940 | |
CPU comparisonIntel Pentium E5300 or AMD Phenom II X4 940 - which processor is faster? In this comparison we look at the differences and analyze which of these two CPUs is better. We compare the technical data and benchmark results.
The Intel Pentium E5300 has 2 cores with 2 threads and clocks with a maximum frequency of 2.60 GHz. Up to 16 GB of memory is supported in 2 memory channels. The Intel Pentium E5300 was released in Q4/2008. The AMD Phenom II X4 940 has 4 cores with 4 threads and clocks with a maximum frequency of 3.00 GHz. The CPU supports up to GB of memory in 2 memory channels. The AMD Phenom II X4 940 was released in Q1/2009. |
||
| Intel Pentium (150) | Family | AMD Phenom II (52) |
| Intel Pentium E5000/E6000 (13) | CPU group | AMD Phenom II - 800/900 (23) |
| 2 | Generation | 4 |
| Wolfdale (Penryn) | Architecture | Deneb (K10) |
| Desktop / Server | Segment | Desktop / Server |
| -- | Predecessor | -- |
| -- | Successor | -- |
|
|
||
CPU Cores and Base FrequencyThe Intel Pentium E5300 has 2 CPU cores and can calculate 2 threads in parallel. The clock frequency of the Intel Pentium E5300 is 2.60 GHz while the AMD Phenom II X4 940 has 4 CPU cores and 4 threads can calculate simultaneously. The clock frequency of the AMD Phenom II X4 940 is at 3.00 GHz. |
||
| Intel Pentium E5300 | Characteristic | AMD Phenom II X4 940 |
| 2 | Cores | 4 |
| 2 | Threads | 4 |
| normal | Core architecture | normal |
| No | Hyperthreading | No |
| Yes | Overclocking ? | Yes |
| 2.60 GHz | Frequency | 3.00 GHz |
| -- | Turbo Frequency (1 Core) | -- |
| -- | Turbo Frequency (All Cores) | -- |
Memory & PCIeThe Intel Pentium E5300 can use up to 16 GB of memory in 2 memory channels. The maximum memory bandwidth is 21.3 GB/s. The AMD Phenom II X4 940 supports up to GB of memory in 2 memory channels and achieves a memory bandwidth of up to 21.3 GB/s. |
||
| Intel Pentium E5300 | Characteristic | AMD Phenom II X4 940 |
| DDR3-1333, DDR2-800 | Memory | DDR3-1333, DDR2-1066 |
| 16 GB | Max. Memory | |
| 2 (Dual Channel) | Memory channels | 2 (Dual Channel) |
| 21.3 GB/s | Max. Bandwidth | 21.3 GB/s |
| No | ECC | No |
| 2.00 MB | L2 Cache | -- |
| -- | L3 Cache | 6.00 MB |
| -- | PCIe version | -- |
| -- | PCIe lanes | -- |
| -- | PCIe Bandwidth | -- |
Thermal ManagementThe thermal design power (TDP for short) of the Intel Pentium E5300 is 65 W, while the AMD Phenom II X4 940 has a TDP of 125 W. The TDP specifies the necessary cooling solution that is required to cool the processor sufficiently. |
||
| Intel Pentium E5300 | Characteristic | AMD Phenom II X4 940 |
| 65 W | TDP (PL1 / PBP) | 125 W |
| -- | TDP (PL2) | -- |
| -- | TDP up | -- |
| -- | TDP down | -- |
| -- | Tjunction max. | -- |
Technical detailsThe Intel Pentium E5300 is manufactured in 45 nm and has 2.00 MB cache. The AMD Phenom II X4 940 is manufactured in 45 nm and has a 6.00 MB cache. |
||
| Intel Pentium E5300 | Characteristic | AMD Phenom II X4 940 |
| 45 nm | Technology | 45 nm |
| Monolithic | Chip design | Unknown |
| x86-64 (64 bit) | Instruction set (ISA) | x86-64 (64 bit) |
| MMX, SSE, SSE2, SSE3 | ISA extensions | SSE3, SSE4a |
| LGA 775 | Socket | AM2+ |
| VT-x | Virtualization | AMD-V |
| No | AES-NI | No |
| Windows 10, Linux | Operating systems | Windows 10, Linux |
| Q4/2008 | Release date | Q1/2009 |
| -- | Release price | -- |
| show more data | show more data | |
|
2C 2T @ 2.60 GHz buy now on Amazon and save!
4C 4T @ 3.00 GHz buy now on Amazon and save!
|
||
Rate these processors
Average performance in benchmarks
⌀ Single core performance in 1 CPU benchmarks
⌀ Multi core performance in 2 CPU benchmarks
Geekbench 5, 64bit (Single-Core)
Geekbench 5 is a cross plattform benchmark that heavily uses the systems memory. A fast memory will push the result a lot. The single-core test only uses one CPU core, the amount of cores or hyperthreading ability doesn't count.
|
Intel Pentium E5300
2C 2T @ 2.60 GHz |
||
|
AMD Phenom II X4 940
4C 4T @ 3.00 GHz |
||
Geekbench 5, 64bit (Multi-Core)
Geekbench 5 is a cross plattform benchmark that heavily uses the systems memory. A fast memory will push the result a lot. The multi-core test involves all CPU cores and taks a big advantage of hyperthreading.
|
|
Intel Pentium E5300
2C 2T @ 2.60 GHz |
||
|
|
AMD Phenom II X4 940
4C 4T @ 3.00 GHz |
||
Estimated results for PassMark CPU Mark
Some of the CPUs listed below have been benchmarked by CPU-monkey. However the majority of CPUs have not been tested and the results have been estimated by a CPU-monkey’s secret proprietary formula. As such they do not accurately reflect the actual Passmark CPU mark values and are not endorsed by PassMark Software Pty Ltd.
|
|
Intel Pentium E5300
2C 2T @ 2.60 GHz |
||
|
|
AMD Phenom II X4 940
4C 4T @ 3.00 GHz |
||
Cinebench R20 (Single-Core)
Cinebench R20 is the successor of Cinebench R15 and is also based on the Cinema 4 Suite. Cinema 4 is a worldwide used software to create 3D forms. The single-core test only uses one CPU core, the amount of cores or hyperthreading ability doesn't count.
|
|
Intel Pentium E5300
2C 2T @ 2.60 GHz |
||
|
|
AMD Phenom II X4 940
4C 4T @ 3.00 GHz |
||
Cinebench R20 (Multi-Core)
Cinebench R20 is the successor of Cinebench R15 and is also based on the Cinema 4 Suite. Cinema 4 is a worldwide used software to create 3D forms. The multi-core test involves all CPU cores and taks a big advantage of hyperthreading.
|
|
Intel Pentium E5300
2C 2T @ 2.60 GHz |
||
|
|
AMD Phenom II X4 940
4C 4T @ 3.00 GHz |
||
CPU-Z Benchmark 17 (Multi-Core)
The CPU-Z benchmark measures a processor's performance by measuring the time it takes the system to complete all benchmark calculations. The faster the benchmark is completed, the higher the score.
|
|
Intel Pentium E5300
2C 2T @ 2.60 GHz |
||
|
|
AMD Phenom II X4 940
4C 4T @ 3.00 GHz |
||
Cinebench R15 (Single-Core)
Cinebench R15 is the successor of Cinebench 11.5 and is also based on the Cinema 4 Suite. Cinema 4 is a worldwide used software to create 3D forms. The single-core test only uses one CPU core, the amount of cores or hyperthreading ability doesn't count.
|
|
Intel Pentium E5300
2C 2T @ 2.60 GHz |
||
|
|
AMD Phenom II X4 940
4C 4T @ 3.00 GHz |
||
Cinebench R15 (Multi-Core)
Cinebench R15 is the successor of Cinebench 11.5 and is also based on the Cinema 4 Suite. Cinema 4 is a worldwide used software to create 3D forms. The multi-core test involves all CPU cores and taks a big advantage of hyperthreading.
|
|
Intel Pentium E5300
2C 2T @ 2.60 GHz |
||
|
|
AMD Phenom II X4 940
4C 4T @ 3.00 GHz |
||
Devices using this processor |
|
| Intel Pentium E5300 | AMD Phenom II X4 940 |
| Unknown | Unknown |
Popular comparisons containing this CPUs
back to index
