Intel Pentium D1508 vs AMD FX-8100
Last updated:
CPU comparison with benchmarks
|
 |
|
| Intel Pentium D1508 | AMD FX-8100 | |
CPU comparisonIntel Pentium D1508 or AMD FX-8100 - which processor is faster? In this comparison we look at the differences and analyze which of these two CPUs is better. We compare the technical data and benchmark results.
The Intel Pentium D1508 has 2 cores with 4 threads and clocks with a maximum frequency of 2.60 GHz. Up to 128 GB of memory is supported in 2 memory channels. The Intel Pentium D1508 was released in Q4/2015. The AMD FX-8100 has 8 cores with 8 threads and clocks with a maximum frequency of 3.70 GHz. The CPU supports up to GB of memory in 2 memory channels. The AMD FX-8100 was released in Q4/2011. |
||
| Intel Pentium (150) | Family | AMD FX (30) |
| Intel Pentium D (5) | CPU group | AMD FX-8000 (11) |
| 5 | Generation | 2 |
| Broadwell | Architecture | Vishera (Bulldozer) |
| Desktop / Server | Segment | Desktop / Server |
| -- | Predecessor | -- |
| -- | Successor | -- |
|
|
||
CPU Cores and Base FrequencyThe Intel Pentium D1508 has 2 CPU cores and can calculate 4 threads in parallel. The clock frequency of the Intel Pentium D1508 is 2.20 GHz (2.60 GHz) while the AMD FX-8100 has 8 CPU cores and 8 threads can calculate simultaneously. The clock frequency of the AMD FX-8100 is at 2.80 GHz (3.70 GHz). |
||
| Intel Pentium D1508 | Characteristic | AMD FX-8100 |
| 2 | Cores | 8 |
| 4 | Threads | 8 |
| normal | Core architecture | normal |
| Yes | Hyperthreading | No |
| No | Overclocking ? | Yes |
| 2.20 GHz | Frequency | 2.80 GHz |
| 2.60 GHz | Turbo Frequency (1 Core) | 3.70 GHz |
| 2.60 GHz | Turbo Frequency (All Cores) | 3.70 GHz |
Memory & PCIeThe Intel Pentium D1508 can use up to 128 GB of memory in 2 memory channels. The maximum memory bandwidth is 34.1 GB/s. The AMD FX-8100 supports up to GB of memory in 2 memory channels and achieves a memory bandwidth of up to 29.9 GB/s. |
||
| Intel Pentium D1508 | Characteristic | AMD FX-8100 |
| DDR4-2133 | Memory | DDR3-1866 |
| 128 GB | Max. Memory | |
| 2 (Dual Channel) | Memory channels | 2 (Dual Channel) |
| 34.1 GB/s | Max. Bandwidth | 29.9 GB/s |
| Yes | ECC | Yes |
| -- | L2 Cache | -- |
| 3.00 MB | L3 Cache | 8.00 MB |
| 3.0 | PCIe version | -- |
| 32 | PCIe lanes | -- |
| 31.5 GB/s | PCIe Bandwidth | -- |
Thermal ManagementThe thermal design power (TDP for short) of the Intel Pentium D1508 is 25 W, while the AMD FX-8100 has a TDP of 95 W. The TDP specifies the necessary cooling solution that is required to cool the processor sufficiently. |
||
| Intel Pentium D1508 | Characteristic | AMD FX-8100 |
| 25 W | TDP (PL1 / PBP) | 95 W |
| -- | TDP (PL2) | -- |
| -- | TDP up | -- |
| -- | TDP down | -- |
| -- | Tjunction max. | -- |
Technical detailsThe Intel Pentium D1508 is manufactured in 14 nm and has 3.00 MB cache. The AMD FX-8100 is manufactured in 32 nm and has a 8.00 MB cache. |
||
| Intel Pentium D1508 | Characteristic | AMD FX-8100 |
| 14 nm | Technology | 32 nm |
| Monolithic | Chip design | Unknown |
| x86-64 (64 bit) | Instruction set (ISA) | x86-64 (64 bit) |
| SSE4.1, SSE4.2, AVX2 | ISA extensions | SSE4.1, SSE4.2, AVX, FMA3, FMA4 |
| AM1 | Socket | AM3+ |
| VT-x, VT-x EPT, VT-d | Virtualization | AMD-V |
| Yes | AES-NI | Yes |
| Windows 10, Linux | Operating systems | Windows 10, Linux |
| Q4/2015 | Release date | Q4/2011 |
| -- | Release price | -- |
| show more data | show more data | |
|
2C 4T @ 2.20 GHz (2.60 GHz) buy now on Amazon and save!
8C 8T @ 2.80 GHz (3.70 GHz) buy now on Amazon and save!
|
||
Rate these processors
Average performance in benchmarks
⌀ Single core performance in 0 CPU benchmarks
⌀ Multi core performance in 1 CPU benchmarks
Estimated results for PassMark CPU Mark
Some of the CPUs listed below have been benchmarked by CPU-monkey. However the majority of CPUs have not been tested and the results have been estimated by a CPU-monkey’s secret proprietary formula. As such they do not accurately reflect the actual Passmark CPU mark values and are not endorsed by PassMark Software Pty Ltd.
|
Intel Pentium D1508
2C 4T @ 2.60 GHz |
||
|
AMD FX-8100
8C 8T @ 3.70 GHz |
||
Geekbench 5, 64bit (Single-Core)
Geekbench 5 is a cross plattform benchmark that heavily uses the systems memory. A fast memory will push the result a lot. The single-core test only uses one CPU core, the amount of cores or hyperthreading ability doesn't count.
|
|
Intel Pentium D1508
2C 4T @ 2.60 GHz |
||
|
|
AMD FX-8100
8C 8T @ 3.70 GHz |
||
Geekbench 5, 64bit (Multi-Core)
Geekbench 5 is a cross plattform benchmark that heavily uses the systems memory. A fast memory will push the result a lot. The multi-core test involves all CPU cores and taks a big advantage of hyperthreading.
|
|
Intel Pentium D1508
2C 4T @ 2.60 GHz |
||
|
|
AMD FX-8100
8C 8T @ 3.70 GHz |
||
Cinebench R20 (Single-Core)
Cinebench R20 is the successor of Cinebench R15 and is also based on the Cinema 4 Suite. Cinema 4 is a worldwide used software to create 3D forms. The single-core test only uses one CPU core, the amount of cores or hyperthreading ability doesn't count.
|
|
Intel Pentium D1508
2C 4T @ 2.60 GHz |
||
|
|
AMD FX-8100
8C 8T @ 3.70 GHz |
||
Cinebench R20 (Multi-Core)
Cinebench R20 is the successor of Cinebench R15 and is also based on the Cinema 4 Suite. Cinema 4 is a worldwide used software to create 3D forms. The multi-core test involves all CPU cores and taks a big advantage of hyperthreading.
|
|
Intel Pentium D1508
2C 4T @ 2.60 GHz |
||
|
|
AMD FX-8100
8C 8T @ 3.70 GHz |
||
Cinebench R15 (Single-Core)
Cinebench R15 is the successor of Cinebench 11.5 and is also based on the Cinema 4 Suite. Cinema 4 is a worldwide used software to create 3D forms. The single-core test only uses one CPU core, the amount of cores or hyperthreading ability doesn't count.
|
|
Intel Pentium D1508
2C 4T @ 2.60 GHz |
||
|
|
AMD FX-8100
8C 8T @ 3.70 GHz |
||
Devices using this processor |
|
| Intel Pentium D1508 | AMD FX-8100 |
| Unknown | Unknown |
Popular comparisons containing this CPUs
back to index
