Intel Xeon Platinum 8153 vs AMD EPYC 7773X
Last updated:
CPU comparison with benchmarks
|
 |
|
| Intel Xeon Platinum 8153 | AMD EPYC 7773X | |
CPU comparisonIn this CPU comparison, we compare the Intel Xeon Platinum 8153 and the AMD EPYC 7773X and use benchmarks to check which processor is faster.
We compare the Intel Xeon Platinum 8153 16 core processor released in Q3/2017 with the AMD EPYC 7773X which has 64 CPU cores and was introduced in Q2/2022. |
||
| Intel Xeon Platinum (89) | Family | AMD EPYC (129) |
| Intel Xeon Platinum 8100 (16) | CPU group | AMD EPYC 7003 (29) |
| 1 | Generation | 3 |
| Skylake | Architecture | Milan (Zen 3) |
| Desktop / Server | Segment | Desktop / Server |
| -- | Predecessor | -- |
| -- | Successor | -- |
|
|
||
CPU Cores and Base FrequencyThe Intel Xeon Platinum 8153 is a 16 core processor with a clock frequency of 2.00 GHz (2.80 GHz). The processor can compute 32 threads at the same time. The AMD EPYC 7773X clocks with 2.20 GHz (3.50 GHz), has 64 CPU cores and can calculate 128 threads in parallel. |
||
| Intel Xeon Platinum 8153 | Characteristic | AMD EPYC 7773X |
| 16 | Cores | 64 |
| 32 | Threads | 128 |
| normal | Core architecture | normal |
| Yes | Hyperthreading | Yes |
| No | Overclocking ? | No |
| 2.00 GHz | Frequency | 2.20 GHz |
| 2.80 GHz | Turbo Frequency (1 Core) | 3.50 GHz |
| 2.40 GHz | Turbo Frequency (All Cores) | -- |
Memory & PCIeUp to 768 GB of memory in a maximum of 6 memory channels is supported by the Intel Xeon Platinum 8153, while the AMD EPYC 7773X supports a maximum of 4096 GB of memory with a maximum memory bandwidth of 204.8 GB/s enabled. |
||
| Intel Xeon Platinum 8153 | Characteristic | AMD EPYC 7773X |
| DDR4-2666 | Memory | DDR4-3200 |
| 768 GB | Max. Memory | 4096 GB |
| 6 (Hexa Channel) | Memory channels | 8 (Octa Channel) |
| 128.1 GB/s | Max. Bandwidth | 204.8 GB/s |
| Yes | ECC | Yes |
| -- | L2 Cache | 32.00 MB |
| 22.00 MB | L3 Cache | 768.00 MB |
| 3.0 | PCIe version | 4.0 |
| 48 | PCIe lanes | 128 |
| 47.3 GB/s | PCIe Bandwidth | 252.0 GB/s |
Thermal ManagementThe Intel Xeon Platinum 8153 has a TDP of 125 W. The TDP of the AMD EPYC 7773X is 280 W. System integrators use the TDP of the processor as a guide when dimensioning the cooling solution. |
||
| Intel Xeon Platinum 8153 | Characteristic | AMD EPYC 7773X |
| 125 W | TDP (PL1 / PBP) | 280 W |
| -- | TDP (PL2) | -- |
| -- | TDP up | -- |
| -- | TDP down | 225 W |
| -- | Tjunction max. | -- |
Technical detailsThe Intel Xeon Platinum 8153 has 22.00 MB cache and is manufactured in 14 nm. The cache of AMD EPYC 7773X is at 800.00 MB. The processor is manufactured in 7 nm. |
||
| Intel Xeon Platinum 8153 | Characteristic | AMD EPYC 7773X |
| 14 nm | Technology | 7 nm |
| Monolithic | Chip design | Chiplet |
| x86-64 (64 bit) | Instruction set (ISA) | x86-64 (64 bit) |
| SSE4.1, SSE4.2, AVX2, AVX-512 | ISA extensions | SSE4a, SSE4.1, SSE4.2, AVX2, FMA3 |
| LGA 3647 | Socket | SP3 |
| VT-x, VT-x EPT, VT-d | Virtualization | AMD-V, SVM |
| Yes | AES-NI | Yes |
| Windows 10, Linux | Operating systems | Windows 10, Linux |
| Q3/2017 | Release date | Q2/2022 |
| 3100 $ | Release price | 8800 $ |
| show more data | show more data | |
|
16C 32T @ 2.00 GHz (2.80 GHz) buy now on Amazon and save!
64C 128T @ 2.20 GHz (3.50 GHz) buy now on Amazon and save!
|
||
Rate these processors
Average performance in benchmarks
⌀ Single core performance in 1 CPU benchmarks
⌀ Multi core performance in 0 CPU benchmarks
Geekbench 5, 64bit (Single-Core)
Geekbench 5 is a cross plattform benchmark that heavily uses the systems memory. A fast memory will push the result a lot. The single-core test only uses one CPU core, the amount of cores or hyperthreading ability doesn't count.
|
Intel Xeon Platinum 8153
16C 32T @ 2.80 GHz |
||
|
AMD EPYC 7773X
64C 128T @ 3.50 GHz |
||
Cinebench 2024 (Single-Core)
The Cinebench 2024 benchmark is based on the Redshift rendering engine, which is also used in Maxon's 3D program Cinema 4D. The benchmark runs are each 10 minutes long to test whether the processor is limited by its heat generation.
|
|
Intel Xeon Platinum 8153
16C 32T @ 2.80 GHz |
||
|
|
AMD EPYC 7773X
64C 128T @ 3.50 GHz |
||
Cinebench 2024 (Multi-Core)
The Multi-Core test of the Cinebench 2024 benchmark uses all cpu cores to render using the Redshift rendering engine, which is also used in Maxons Cinema 4D. The benchmark run is 10 minutes long to test whether the processor is limited by its heat generation.
|
|
Intel Xeon Platinum 8153
16C 32T @ 2.80 GHz |
||
|
|
AMD EPYC 7773X
64C 128T @ 3.50 GHz |
||
Cinebench R23 (Single-Core)
Cinebench R23 is the successor of Cinebench R20 and is also based on the Cinema 4 Suite. Cinema 4 is a worldwide used software to create 3D forms. The single-core test only uses one CPU core, the amount of cores or hyperthreading ability doesn't count.
|
|
Intel Xeon Platinum 8153
16C 32T @ 2.80 GHz |
||
|
|
AMD EPYC 7773X
64C 128T @ 3.50 GHz |
||
Geekbench 5, 64bit (Multi-Core)
Geekbench 5 is a cross plattform benchmark that heavily uses the systems memory. A fast memory will push the result a lot. The multi-core test involves all CPU cores and taks a big advantage of hyperthreading.
|
|
Intel Xeon Platinum 8153
16C 32T @ 2.40 GHz |
||
|
|
AMD EPYC 7773X
64C 128T @ 2.20 GHz |
||
Estimated results for PassMark CPU Mark
Some of the CPUs listed below have been benchmarked by CPU-monkey. However the majority of CPUs have not been tested and the results have been estimated by a CPU-monkey’s secret proprietary formula. As such they do not accurately reflect the actual Passmark CPU mark values and are not endorsed by PassMark Software Pty Ltd.
|
|
Intel Xeon Platinum 8153
16C 32T @ 2.40 GHz |
||
|
|
AMD EPYC 7773X
64C 128T @ 2.20 GHz |
||
Cinebench R15 (Single-Core)
Cinebench R15 is the successor of Cinebench 11.5 and is also based on the Cinema 4 Suite. Cinema 4 is a worldwide used software to create 3D forms. The single-core test only uses one CPU core, the amount of cores or hyperthreading ability doesn't count.
|
|
Intel Xeon Platinum 8153
16C 32T @ 2.80 GHz |
||
|
|
AMD EPYC 7773X
64C 128T @ 3.50 GHz |
||
Cinebench R15 (Multi-Core)
Cinebench R15 is the successor of Cinebench 11.5 and is also based on the Cinema 4 Suite. Cinema 4 is a worldwide used software to create 3D forms. The multi-core test involves all CPU cores and taks a big advantage of hyperthreading.
|
|
Intel Xeon Platinum 8153
16C 32T @ 2.40 GHz |
||
|
|
AMD EPYC 7773X
64C 128T @ 2.20 GHz |
||
Devices using this processor |
|
| Intel Xeon Platinum 8153 | AMD EPYC 7773X |
| Unknown | Unknown |
Popular comparisons containing this CPUs
back to index
