Intel Xeon D-2796NT vs Intel Xeon E5-2608L v3
Last updated:
CPU comparison with benchmarks
|
 |
|
| Intel Xeon D-2796NT | Intel Xeon E5-2608L v3 | |
CPU comparisonIntel Xeon D-2796NT or Intel Xeon E5-2608L v3 - which processor is faster? In this comparison we look at the differences and analyze which of these two CPUs is better. We compare the technical data and benchmark results.
The Intel Xeon D-2796NT has 20 cores with 40 threads and clocks with a maximum frequency of 3.10 GHz. Up to 1024 GB of memory is supported in 4 memory channels. The Intel Xeon D-2796NT was released in Q1/2022. The Intel Xeon E5-2608L v3 has 6 cores with 12 threads and clocks with a maximum frequency of 2.00 GHz. The CPU supports up to 768 GB of memory in 4 memory channels. The Intel Xeon E5-2608L v3 was released in Q3/2014. |
||
| Intel Xeon D (79) | Family | Intel Xeon E5 (71) |
| Intel Xeon D-2700 (16) | CPU group | Intel Xeon E5 v3 (32) |
| 4 | Generation | 5 |
| Ice Lake | Architecture | Haswell E |
| Desktop / Server | Segment | Desktop / Server |
| -- | Predecessor | -- |
| -- | Successor | -- |
|
|
||
CPU Cores and Base FrequencyThe Intel Xeon D-2796NT has 20 CPU cores and can calculate 40 threads in parallel. The clock frequency of the Intel Xeon D-2796NT is 2.00 GHz (3.10 GHz) while the Intel Xeon E5-2608L v3 has 6 CPU cores and 12 threads can calculate simultaneously. The clock frequency of the Intel Xeon E5-2608L v3 is at 2.00 GHz. |
||
| Intel Xeon D-2796NT | Characteristic | Intel Xeon E5-2608L v3 |
| 20 | Cores | 6 |
| 40 | Threads | 12 |
| normal | Core architecture | normal |
| Yes | Hyperthreading | Yes |
| No | Overclocking ? | No |
| 2.00 GHz | Frequency | 2.00 GHz |
| 3.10 GHz | Turbo Frequency (1 Core) | -- |
| 2.40 GHz | Turbo Frequency (All Cores) | -- |
Memory & PCIeThe Intel Xeon D-2796NT can use up to 1024 GB of memory in 4 memory channels. The maximum memory bandwidth is 93.8 GB/s. The Intel Xeon E5-2608L v3 supports up to 768 GB of memory in 4 memory channels and achieves a memory bandwidth of up to 68.2 GB/s. |
||
| Intel Xeon D-2796NT | Characteristic | Intel Xeon E5-2608L v3 |
| DDR4-2933 | Memory | DDR4-2133 |
| 1024 GB | Max. Memory | 768 GB |
| 4 (Quad Channel) | Memory channels | 4 (Quad Channel) |
| 93.8 GB/s | Max. Bandwidth | 68.2 GB/s |
| Yes | ECC | Yes |
| 30.00 MB | L2 Cache | -- |
| -- | L3 Cache | 15.00 MB |
| 4.0 | PCIe version | 3.0 |
| 32 | PCIe lanes | 40 |
| 63.0 GB/s | PCIe Bandwidth | 39.4 GB/s |
Thermal ManagementThe thermal design power (TDP for short) of the Intel Xeon D-2796NT is 120 W, while the Intel Xeon E5-2608L v3 has a TDP of 52 W. The TDP specifies the necessary cooling solution that is required to cool the processor sufficiently. |
||
| Intel Xeon D-2796NT | Characteristic | Intel Xeon E5-2608L v3 |
| 120 W | TDP (PL1 / PBP) | 52 W |
| -- | TDP (PL2) | -- |
| -- | TDP up | -- |
| -- | TDP down | -- |
| -- | Tjunction max. | -- |
Technical detailsThe Intel Xeon D-2796NT is manufactured in 10 nm and has 30.00 MB cache. The Intel Xeon E5-2608L v3 is manufactured in 22 nm and has a 15.00 MB cache. |
||
| Intel Xeon D-2796NT | Characteristic | Intel Xeon E5-2608L v3 |
| 10 nm | Technology | 22 nm |
| Monolithic | Chip design | Monolithic |
| x86-64 (64 bit) | Instruction set (ISA) | x86-64 (64 bit) |
| SSE4.1, SSE4.2, AVX2, AVX-512 | ISA extensions | SSE4.1, SSE4.2, AVX2 |
| BGA 2579 | Socket | LGA 2011-3 |
| VT-x, VT-x EPT, VT-d | Virtualization | VT-x, VT-x EPT, VT-d |
| Yes | AES-NI | Yes |
| Windows 10, Linux | Operating systems | Windows 10, Linux |
| Q1/2022 | Release date | Q3/2014 |
| 2165 $ | Release price | -- |
| show more data | show more data | |
20C 40T @ 2.00 GHz (3.10 GHz) buy now on Amazon and save!
6C 12T @ 2.00 GHz buy now on Amazon and save!
|
||
Rate these processors
Estimated results for PassMark CPU Mark
Some of the CPUs listed below have been benchmarked by CPU-monkey. However the majority of CPUs have not been tested and the results have been estimated by a CPU-monkey’s secret proprietary formula. As such they do not accurately reflect the actual Passmark CPU mark values and are not endorsed by PassMark Software Pty Ltd.
|
Intel Xeon D-2796NT
20C 40T @ 2.40 GHz |
||
|
Intel Xeon E5-2608L v3
6C 12T @ 2.00 GHz |
||
Cinebench R15 (Single-Core)
Cinebench R15 is the successor of Cinebench 11.5 and is also based on the Cinema 4 Suite. Cinema 4 is a worldwide used software to create 3D forms. The single-core test only uses one CPU core, the amount of cores or hyperthreading ability doesn't count.
|
|
Intel Xeon D-2796NT
20C 40T @ 3.10 GHz |
||
|
|
Intel Xeon E5-2608L v3
6C 12T @ 2.00 GHz |
||
Cinebench R15 (Multi-Core)
Cinebench R15 is the successor of Cinebench 11.5 and is also based on the Cinema 4 Suite. Cinema 4 is a worldwide used software to create 3D forms. The multi-core test involves all CPU cores and taks a big advantage of hyperthreading.
|
|
Intel Xeon D-2796NT
20C 40T @ 2.40 GHz |
||
|
|
Intel Xeon E5-2608L v3
6C 12T @ 2.00 GHz |
||
Devices using this processor |
|
| Intel Xeon D-2796NT | Intel Xeon E5-2608L v3 |
| Unknown | Unknown |
Popular comparisons containing this CPUs
back to index
