Intel Pentium E6800 vs Intel Xeon E5-2697 v4
Last updated:
CPU comparison with benchmarks
|
 |
|
| Intel Pentium E6800 | Intel Xeon E5-2697 v4 | |
CPU comparisonIntel Pentium E6800 or Intel Xeon E5-2697 v4 - which processor is faster? In this comparison we look at the differences and analyze which of these two CPUs is better. We compare the technical data and benchmark results.
The Intel Pentium E6800 has 2 cores with 2 threads and clocks with a maximum frequency of 3.33 GHz. Up to 16 GB of memory is supported in 2 memory channels. The Intel Pentium E6800 was released in Q3/2010. The Intel Xeon E5-2697 v4 has 18 cores with 36 threads and clocks with a maximum frequency of 3.60 GHz. The CPU supports up to 1536 GB of memory in 4 memory channels. The Intel Xeon E5-2697 v4 was released in Q1/2016. |
||
| Intel Pentium (150) | Family | Intel Xeon E5 (71) |
| Intel Pentium E5000/E6000 (13) | CPU group | Intel Xeon E5 v4 (24) |
| 2 | Generation | 6 |
| Wolfdale (Penryn) | Architecture | Broadwell E |
| Desktop / Server | Segment | Desktop / Server |
| -- | Predecessor | Intel Xeon E5-2697 v3 |
| -- | Successor | -- |
|
|
||
CPU Cores and Base FrequencyThe Intel Pentium E6800 has 2 CPU cores and can calculate 2 threads in parallel. The clock frequency of the Intel Pentium E6800 is 3.33 GHz while the Intel Xeon E5-2697 v4 has 18 CPU cores and 36 threads can calculate simultaneously. The clock frequency of the Intel Xeon E5-2697 v4 is at 2.30 GHz (3.60 GHz). |
||
| Intel Pentium E6800 | Characteristic | Intel Xeon E5-2697 v4 |
| 2 | Cores | 18 |
| 2 | Threads | 36 |
| normal | Core architecture | normal |
| No | Hyperthreading | Yes |
| Yes | Overclocking ? | No |
| 3.33 GHz | Frequency | 2.30 GHz |
| -- | Turbo Frequency (1 Core) | 3.60 GHz |
| -- | Turbo Frequency (All Cores) | 2.80 GHz |
Memory & PCIeThe Intel Pentium E6800 can use up to 16 GB of memory in 2 memory channels. The maximum memory bandwidth is 21.3 GB/s. The Intel Xeon E5-2697 v4 supports up to 1536 GB of memory in 4 memory channels and achieves a memory bandwidth of up to 76.8 GB/s. |
||
| Intel Pentium E6800 | Characteristic | Intel Xeon E5-2697 v4 |
| DDR3-1333, DDR2-800 | Memory | DDR4-2400 |
| 16 GB | Max. Memory | 1536 GB |
| 2 (Dual Channel) | Memory channels | 4 (Quad Channel) |
| 21.3 GB/s | Max. Bandwidth | 76.8 GB/s |
| No | ECC | Yes |
| 2.00 MB | L2 Cache | -- |
| -- | L3 Cache | 45.00 MB |
| -- | PCIe version | 3.0 |
| -- | PCIe lanes | 40 |
| -- | PCIe Bandwidth | 39.4 GB/s |
Thermal ManagementThe thermal design power (TDP for short) of the Intel Pentium E6800 is 65 W, while the Intel Xeon E5-2697 v4 has a TDP of 145 W. The TDP specifies the necessary cooling solution that is required to cool the processor sufficiently. |
||
| Intel Pentium E6800 | Characteristic | Intel Xeon E5-2697 v4 |
| 65 W | TDP (PL1 / PBP) | 145 W |
| -- | TDP (PL2) | -- |
| -- | TDP up | -- |
| -- | TDP down | -- |
| -- | Tjunction max. | -- |
Technical detailsThe Intel Pentium E6800 is manufactured in 45 nm and has 2.00 MB cache. The Intel Xeon E5-2697 v4 is manufactured in 14 nm and has a 45.00 MB cache. |
||
| Intel Pentium E6800 | Characteristic | Intel Xeon E5-2697 v4 |
| 45 nm | Technology | 14 nm |
| Monolithic | Chip design | Monolithic |
| x86-64 (64 bit) | Instruction set (ISA) | x86-64 (64 bit) |
| MMX, SSE, SSE2, SSE3 | ISA extensions | SSE4.1, SSE4.2, AVX2 |
| LGA 775 | Socket | LGA 2011-3 |
| VT-x | Virtualization | VT-x, VT-x EPT, VT-d |
| No | AES-NI | Yes |
| Windows 10, Linux | Operating systems | Windows 10, Linux |
| Q3/2010 | Release date | Q1/2016 |
| -- | Release price | 2700 $ |
| show more data | show more data | |
|
2C 2T @ 3.33 GHz buy now on Amazon and save!
18C 36T @ 2.30 GHz (3.60 GHz) buy now on Amazon and save!
|
||
Rate these processors
Average performance in benchmarks
⌀ Single core performance in 1 CPU benchmarks
⌀ Multi core performance in 2 CPU benchmarks
Geekbench 5, 64bit (Single-Core)
Geekbench 5 is a cross plattform benchmark that heavily uses the systems memory. A fast memory will push the result a lot. The single-core test only uses one CPU core, the amount of cores or hyperthreading ability doesn't count.
|
Intel Pentium E6800
2C 2T @ 3.33 GHz |
||
|
Intel Xeon E5-2697 v4
18C 36T @ 3.60 GHz |
||
Geekbench 5, 64bit (Multi-Core)
Geekbench 5 is a cross plattform benchmark that heavily uses the systems memory. A fast memory will push the result a lot. The multi-core test involves all CPU cores and taks a big advantage of hyperthreading.
|
|
Intel Pentium E6800
2C 2T @ 3.33 GHz |
||
|
|
Intel Xeon E5-2697 v4
18C 36T @ 2.80 GHz |
||
Estimated results for PassMark CPU Mark
Some of the CPUs listed below have been benchmarked by CPU-monkey. However the majority of CPUs have not been tested and the results have been estimated by a CPU-monkey’s secret proprietary formula. As such they do not accurately reflect the actual Passmark CPU mark values and are not endorsed by PassMark Software Pty Ltd.
|
|
Intel Pentium E6800
2C 2T @ 3.33 GHz |
||
|
|
Intel Xeon E5-2697 v4
18C 36T @ 2.80 GHz |
||
Geekbench 6 (Single-Core)
Geekbench 6 is a benchmark for modern computers, notebooks and smartphones. What is new is an optimized utilization of newer CPU architectures, e.g. based on the big.LITTLE concept and combining CPU cores of different sizes. The single-core benchmark only evaluates the performance of the fastest CPU core, the number of CPU cores in a processor is irrelevant here.
|
|
Intel Pentium E6800
2C 2T @ 3.33 GHz |
||
|
|
Intel Xeon E5-2697 v4
18C 36T @ 3.60 GHz |
||
Geekbench 6 (Multi-Core)
Geekbench 6 is a benchmark for modern computers, notebooks and smartphones. What is new is an optimized utilization of newer CPU architectures, e.g. based on the big.LITTLE concept and combining CPU cores of different sizes. The multi-core benchmark evaluates the performance of all of the processor's CPU cores. Virtual thread improvements such as AMD SMT or Intel's Hyper-Threading have a positive impact on the benchmark result.
|
|
Intel Pentium E6800
2C 2T @ 3.33 GHz |
||
|
|
Intel Xeon E5-2697 v4
18C 36T @ 2.80 GHz |
||
Cinebench R20 (Single-Core)
Cinebench R20 is the successor of Cinebench R15 and is also based on the Cinema 4 Suite. Cinema 4 is a worldwide used software to create 3D forms. The single-core test only uses one CPU core, the amount of cores or hyperthreading ability doesn't count.
|
|
Intel Pentium E6800
2C 2T @ 3.33 GHz |
||
|
|
Intel Xeon E5-2697 v4
18C 36T @ 3.60 GHz |
||
Cinebench R20 (Multi-Core)
Cinebench R20 is the successor of Cinebench R15 and is also based on the Cinema 4 Suite. Cinema 4 is a worldwide used software to create 3D forms. The multi-core test involves all CPU cores and taks a big advantage of hyperthreading.
|
|
Intel Pentium E6800
2C 2T @ 3.33 GHz |
||
|
|
Intel Xeon E5-2697 v4
18C 36T @ 2.80 GHz |
||
Cinebench R15 (Single-Core)
Cinebench R15 is the successor of Cinebench 11.5 and is also based on the Cinema 4 Suite. Cinema 4 is a worldwide used software to create 3D forms. The single-core test only uses one CPU core, the amount of cores or hyperthreading ability doesn't count.
|
|
Intel Pentium E6800
2C 2T @ 3.33 GHz |
||
|
|
Intel Xeon E5-2697 v4
18C 36T @ 3.60 GHz |
||
Cinebench R15 (Multi-Core)
Cinebench R15 is the successor of Cinebench 11.5 and is also based on the Cinema 4 Suite. Cinema 4 is a worldwide used software to create 3D forms. The multi-core test involves all CPU cores and taks a big advantage of hyperthreading.
|
|
Intel Pentium E6800
2C 2T @ 3.33 GHz |
||
|
|
Intel Xeon E5-2697 v4
18C 36T @ 2.80 GHz |
||
Devices using this processor |
|
| Intel Pentium E6800 | Intel Xeon E5-2697 v4 |
| Unknown | Unknown |
Popular comparisons containing this CPUs
back to index
