AMD FX-6100 vs AMD EPYC 7232P
Last updated:
CPU comparison with benchmarks
|
 |
|
| AMD FX-6100 | AMD EPYC 7232P | |
CPU comparisonAMD FX-6100 or AMD EPYC 7232P - which processor is faster? In this comparison we look at the differences and analyze which of these two CPUs is better. We compare the technical data and benchmark results.
The AMD FX-6100 has 6 cores with 6 threads and clocks with a maximum frequency of 3.90 GHz. Up to GB of memory is supported in 2 memory channels. The AMD FX-6100 was released in Q4/2011. The AMD EPYC 7232P has 8 cores with 16 threads and clocks with a maximum frequency of 3.20 GHz. The CPU supports up to GB of memory in 8 memory channels. The AMD EPYC 7232P was released in Q3/2019. |
||
| AMD FX (30) | Family | AMD EPYC (129) |
| AMD FX-6100/6200 (3) | CPU group | AMD EPYC 7002 (24) |
| 1 | Generation | 2 |
| Zambezi (Bulldozer) | Architecture | Rome (Zen 2) |
| Desktop / Server | Segment | Desktop / Server |
| -- | Predecessor | -- |
| -- | Successor | -- |
|
|
||
CPU Cores and Base FrequencyThe AMD FX-6100 is a 6 core processor with a clock frequency of 3.30 GHz (3.90 GHz). The AMD EPYC 7232P has 8 CPU cores with a clock frequency of 3.10 GHz (3.20 GHz). |
||
| AMD FX-6100 | Characteristic | AMD EPYC 7232P |
| 6 | Cores | 8 |
| 6 | Threads | 16 |
| normal | Core architecture | normal |
| No | Hyperthreading | Yes |
| Yes | Overclocking ? | No |
| 3.30 GHz | Frequency | 3.10 GHz |
| 3.90 GHz | Turbo Frequency (1 Core) | 3.20 GHz |
| 3.90 GHz | Turbo Frequency (All Cores) | 3.20 GHz |
Memory & PCIeThe AMD FX-6100 supports a maximum of GB of memory in 2 memory channels. The AMD EPYC 7232P can connect up to GB of memory in 8 memory channels. |
||
| AMD FX-6100 | Characteristic | AMD EPYC 7232P |
| DDR3-1866 | Memory | DDR4-3200 |
| Max. Memory | ||
| 2 (Dual Channel) | Memory channels | 8 (Octa Channel) |
| 29.9 GB/s | Max. Bandwidth | 51.2 GB/s |
| Yes | ECC | Yes |
| -- | L2 Cache | -- |
| 8.00 MB | L3 Cache | 32.00 MB |
| -- | PCIe version | 4.0 |
| -- | PCIe lanes | 128 |
| -- | PCIe Bandwidth | 252.0 GB/s |
Thermal ManagementThe TDP (Thermal Design Power) of a processor specifies the required cooling solution. The AMD FX-6100 has a TDP of 95 W, that of the AMD EPYC 7232P is 120 W. |
||
| AMD FX-6100 | Characteristic | AMD EPYC 7232P |
| 95 W | TDP (PL1 / PBP) | 120 W |
| -- | TDP (PL2) | -- |
| -- | TDP up | -- |
| -- | TDP down | -- |
| -- | Tjunction max. | -- |
Technical detailsThe AMD FX-6100 has a 8.00 MB cache, while the AMD EPYC 7232P cache has a total of 32.00 MB. |
||
| AMD FX-6100 | Characteristic | AMD EPYC 7232P |
| 32 nm | Technology | 7 nm |
| Unknown | Chip design | Chiplet |
| x86-64 (64 bit) | Instruction set (ISA) | x86-64 (64 bit) |
| SSE4.1, SSE4.2, AVX | ISA extensions | SSE4a, SSE4.1, SSE4.2, AVX2, FMA3 |
| AM3+ | Socket | SP3 |
| AMD-V | Virtualization | AMD-V, SVM |
| Yes | AES-NI | Yes |
| Windows 10, Linux | Operating systems | Windows 10, Linux |
| Q4/2011 | Release date | Q3/2019 |
| 100 $ | Release price | 790 $ |
| show more data | show more data | |
6C 6T @ 3.30 GHz (3.90 GHz) buy now on Amazon and save!
8C 16T @ 3.10 GHz (3.20 GHz) buy now on Amazon and save!
|
||
Rate these processors
Average performance in benchmarks
⌀ Single core performance in 1 CPU benchmarks
⌀ Multi core performance in 2 CPU benchmarks
Geekbench 5, 64bit (Single-Core)
Geekbench 5 is a cross plattform benchmark that heavily uses the systems memory. A fast memory will push the result a lot. The single-core test only uses one CPU core, the amount of cores or hyperthreading ability doesn't count.
|
AMD FX-6100
6C 6T @ 3.90 GHz |
||
|
AMD EPYC 7232P
8C 16T @ 3.20 GHz |
||
Geekbench 5, 64bit (Multi-Core)
Geekbench 5 is a cross plattform benchmark that heavily uses the systems memory. A fast memory will push the result a lot. The multi-core test involves all CPU cores and taks a big advantage of hyperthreading.
|
|
AMD FX-6100
6C 6T @ 3.90 GHz |
||
|
|
AMD EPYC 7232P
8C 16T @ 3.20 GHz |
||
Estimated results for PassMark CPU Mark
Some of the CPUs listed below have been benchmarked by CPU-monkey. However the majority of CPUs have not been tested and the results have been estimated by a CPU-monkey’s secret proprietary formula. As such they do not accurately reflect the actual Passmark CPU mark values and are not endorsed by PassMark Software Pty Ltd.
|
|
AMD FX-6100
6C 6T @ 3.90 GHz |
||
|
|
AMD EPYC 7232P
8C 16T @ 3.20 GHz |
||
Geekbench 6 (Single-Core)
Geekbench 6 is a benchmark for modern computers, notebooks and smartphones. What is new is an optimized utilization of newer CPU architectures, e.g. based on the big.LITTLE concept and combining CPU cores of different sizes. The single-core benchmark only evaluates the performance of the fastest CPU core, the number of CPU cores in a processor is irrelevant here.
|
|
AMD FX-6100
6C 6T @ 3.90 GHz |
||
|
|
AMD EPYC 7232P
8C 16T @ 3.20 GHz |
||
Geekbench 6 (Multi-Core)
Geekbench 6 is a benchmark for modern computers, notebooks and smartphones. What is new is an optimized utilization of newer CPU architectures, e.g. based on the big.LITTLE concept and combining CPU cores of different sizes. The multi-core benchmark evaluates the performance of all of the processor's CPU cores. Virtual thread improvements such as AMD SMT or Intel's Hyper-Threading have a positive impact on the benchmark result.
|
|
AMD FX-6100
6C 6T @ 3.90 GHz |
||
|
|
AMD EPYC 7232P
8C 16T @ 3.20 GHz |
||
Cinebench R20 (Single-Core)
Cinebench R20 is the successor of Cinebench R15 and is also based on the Cinema 4 Suite. Cinema 4 is a worldwide used software to create 3D forms. The single-core test only uses one CPU core, the amount of cores or hyperthreading ability doesn't count.
|
|
AMD FX-6100
6C 6T @ 3.90 GHz |
||
|
|
AMD EPYC 7232P
8C 16T @ 3.20 GHz |
||
CPU-Z Benchmark 17 (Multi-Core)
The CPU-Z benchmark measures a processor's performance by measuring the time it takes the system to complete all benchmark calculations. The faster the benchmark is completed, the higher the score.
|
|
AMD FX-6100
6C 6T @ 3.30 GHz |
||
|
|
AMD EPYC 7232P
8C 16T @ 3.10 GHz |
||
Cinebench R15 (Single-Core)
Cinebench R15 is the successor of Cinebench 11.5 and is also based on the Cinema 4 Suite. Cinema 4 is a worldwide used software to create 3D forms. The single-core test only uses one CPU core, the amount of cores or hyperthreading ability doesn't count.
|
|
AMD FX-6100
6C 6T @ 3.90 GHz |
||
|
|
AMD EPYC 7232P
8C 16T @ 3.20 GHz |
||
Cinebench R15 (Multi-Core)
Cinebench R15 is the successor of Cinebench 11.5 and is also based on the Cinema 4 Suite. Cinema 4 is a worldwide used software to create 3D forms. The multi-core test involves all CPU cores and taks a big advantage of hyperthreading.
|
|
AMD FX-6100
6C 6T @ 3.90 GHz |
||
|
|
AMD EPYC 7232P
8C 16T @ 3.20 GHz |
||
Devices using this processor |
|
| AMD FX-6100 | AMD EPYC 7232P |
| Unknown | Unknown |
Popular comparisons containing this CPUs
back to index
