AMD E2-3000 vs AMD Phenom II X6 1075T
Last updated:
CPU comparison with benchmarks
|
 |
|
| AMD E2-3000 | AMD Phenom II X6 1075T | |
CPU comparisonAMD E2-3000 or AMD Phenom II X6 1075T - which processor is faster? In this comparison we look at the differences and analyze which of these two CPUs is better. We compare the technical data and benchmark results.
The AMD E2-3000 has 2 cores with 2 threads and clocks with a maximum frequency of 1.65 GHz. Up to GB of memory is supported in 1 memory channels. The AMD E2-3000 was released in Q3/2013. The AMD Phenom II X6 1075T has 6 cores with 6 threads and clocks with a maximum frequency of 3.50 GHz. The CPU supports up to GB of memory in 2 memory channels. The AMD Phenom II X6 1075T was released in Q3/2010. |
||
| AMD E (23) | Family | AMD Phenom II (52) |
| AMD E2-3000 (4) | CPU group | AMD Phenom II - 1000 (7) |
| 3 | Generation | 6 |
| Llano (K10) | Architecture | Thuban (K10) |
| Mobile | Segment | Desktop / Server |
| -- | Predecessor | -- |
| -- | Successor | -- |
|
|
||
CPU Cores and Base FrequencyThe AMD E2-3000 is a 2 core processor with a clock frequency of 1.65 GHz. The AMD Phenom II X6 1075T has 6 CPU cores with a clock frequency of 3.00 GHz (3.50 GHz). |
||
| AMD E2-3000 | Characteristic | AMD Phenom II X6 1075T |
| 2 | Cores | 6 |
| 2 | Threads | 6 |
| normal | Core architecture | normal |
| No | Hyperthreading | No |
| Yes | Overclocking ? | Yes |
| 1.65 GHz | Frequency | 3.00 GHz |
| -- | Turbo Frequency (1 Core) | 3.50 GHz |
| -- | Turbo Frequency (All Cores) | 3.50 GHz |
Integrated graphics (iGPU)The integrated graphics unit of a processor is not only responsible for the pure image output on the system, but can also significantly increase the efficiency of the system with the support of modern video codecs. |
||
| AMD Radeon HD 8280 | GPU | no iGPU |
| 0.45 GHz | GPU frequency | -- |
| -- | GPU (Turbo) | -- |
| 5 | GPU Generation | -- |
| 28 nm | Technology | |
| 2 | Max. displays | |
| 2 | Compute units | -- |
| 128 | Shader | -- |
| No | Hardware Raytracing | No |
| No | Frame Generation | No |
| 2 GB | Max. GPU Memory | -- |
| 11.1 | DirectX Version | -- |
Hardware codec supportA photo or video codec that is accelerated in hardware can greatly accelerate the working speed of a processor and extend the battery life of notebooks or smartphones when playing videos. |
||
| AMD Radeon HD 8280 | GPU | no iGPU |
| No | Codec h265 / HEVC (8 bit) | No |
| No | Codec h265 / HEVC (10 bit) | No |
| Decode | Codec h264 | No |
| No | Codec VP9 | No |
| No | Codec VP8 | No |
| No | Codec AV1 | No |
| Decode | Codec AVC | No |
| Decode | Codec VC-1 | No |
| Decode / Encode | Codec JPEG | No |
Memory & PCIeThe AMD E2-3000 supports a maximum of GB of memory in 1 memory channels. The AMD Phenom II X6 1075T can connect up to GB of memory in 2 memory channels. |
||
| AMD E2-3000 | Characteristic | AMD Phenom II X6 1075T |
| DDR3L-1600 | Memory | DDR3-1333, DDR2-1066 |
| Max. Memory | ||
| 1 (Single Channel) | Memory channels | 2 (Dual Channel) |
| 12.8 GB/s | Max. Bandwidth | 21.3 GB/s |
| No | ECC | No |
| -- | L2 Cache | -- |
| 1.00 MB | L3 Cache | 6.00 MB |
| -- | PCIe version | -- |
| -- | PCIe lanes | -- |
| -- | PCIe Bandwidth | -- |
Thermal ManagementThe TDP (Thermal Design Power) of a processor specifies the required cooling solution. The AMD E2-3000 has a TDP of 15 W, that of the AMD Phenom II X6 1075T is 125 W. |
||
| AMD E2-3000 | Characteristic | AMD Phenom II X6 1075T |
| 15 W | TDP (PL1 / PBP) | 125 W |
| -- | TDP (PL2) | -- |
| -- | TDP up | -- |
| -- | TDP down | -- |
| -- | Tjunction max. | -- |
Technical detailsThe AMD E2-3000 has a 1.00 MB cache, while the AMD Phenom II X6 1075T cache has a total of 6.00 MB. |
||
| AMD E2-3000 | Characteristic | AMD Phenom II X6 1075T |
| 28 nm | Technology | 45 nm |
| Unknown | Chip design | Unknown |
| x86-64 (64 bit) | Instruction set (ISA) | x86-64 (64 bit) |
| SSE3, SSE4a | ISA extensions | SSE3, SSE4a |
| -- | Socket | AM3 |
| AMD-V | Virtualization | AMD-V |
| Yes | AES-NI | No |
| Operating systems | Windows 10, Linux | |
| Q3/2013 | Release date | Q3/2010 |
| -- | Release price | -- |
| show more data | show more data | |
|
2C 2T @ 1.65 GHz buy now on Amazon and save!
6C 6T @ 3.00 GHz (3.50 GHz) buy now on Amazon and save!
|
||
Rate these processors
Average performance in benchmarks
⌀ Single core performance in 0 CPU benchmarks
⌀ Multi core performance in 1 CPU benchmarks
Estimated results for PassMark CPU Mark
Some of the CPUs listed below have been benchmarked by CPU-monkey. However the majority of CPUs have not been tested and the results have been estimated by a CPU-monkey’s secret proprietary formula. As such they do not accurately reflect the actual Passmark CPU mark values and are not endorsed by PassMark Software Pty Ltd.
|
AMD E2-3000
2C 2T @ 1.65 GHz |
||
|
AMD Phenom II X6 1075T
6C 6T @ 3.50 GHz |
||
iGPU - FP32 Performance (Single-precision GFLOPS)
The theoretical computing performance of the internal graphics unit of the processor with simple accuracy (32 bit) in GFLOPS. GFLOPS indicates how many billion floating point operations the iGPU can perform per second.
|
|
AMD E2-3000
AMD Radeon HD 8280 @ 0.45 GHz |
||
|
|
AMD Phenom II X6 1075T
@ 0.00 GHz |
||
CPU-Z Benchmark 17 (Multi-Core)
The CPU-Z benchmark measures a processor's performance by measuring the time it takes the system to complete all benchmark calculations. The faster the benchmark is completed, the higher the score.
|
|
AMD E2-3000
2C 2T @ 1.65 GHz |
||
|
|
AMD Phenom II X6 1075T
6C 6T @ 3.00 GHz |
||
Cinebench R15 (Single-Core)
Cinebench R15 is the successor of Cinebench 11.5 and is also based on the Cinema 4 Suite. Cinema 4 is a worldwide used software to create 3D forms. The single-core test only uses one CPU core, the amount of cores or hyperthreading ability doesn't count.
|
|
AMD E2-3000
2C 2T @ 1.65 GHz |
||
|
|
AMD Phenom II X6 1075T
6C 6T @ 3.50 GHz |
||
Cinebench R15 (Multi-Core)
Cinebench R15 is the successor of Cinebench 11.5 and is also based on the Cinema 4 Suite. Cinema 4 is a worldwide used software to create 3D forms. The multi-core test involves all CPU cores and taks a big advantage of hyperthreading.
|
|
AMD E2-3000
2C 2T @ 1.65 GHz |
||
|
|
AMD Phenom II X6 1075T
6C 6T @ 3.50 GHz |
||
Devices using this processor |
|
| AMD E2-3000 | AMD Phenom II X6 1075T |
| Unknown | Unknown |
Popular comparisons containing this CPUs
back to index
