Intel Atom C2730 vs AMD Phenom II X2 511
Last updated:
CPU comparison with benchmarks
|
 |
|
| Intel Atom C2730 | AMD Phenom II X2 511 | |
CPU comparisonIntel Atom C2730 or AMD Phenom II X2 511 - which processor is faster? In this comparison we look at the differences and analyze which of these two CPUs is better. We compare the technical data and benchmark results.
The Intel Atom C2730 has 8 cores with 8 threads and clocks with a maximum frequency of 2.40 GHz. Up to 32 GB of memory is supported in 2 memory channels. The Intel Atom C2730 was released in Q3/2013. The AMD Phenom II X2 511 has 2 cores with 2 threads and clocks with a maximum frequency of 3.40 GHz. The CPU supports up to GB of memory in 2 memory channels. The AMD Phenom II X2 511 was released in Q1/2011. |
||
| Intel Atom (108) | Family | AMD Phenom II (52) |
| Intel Atom C2000 (7) | CPU group | AMD Phenom II - 500 (2) |
| 3 | Generation | 1 |
| Avoton | Architecture | Regor (K10) |
| Desktop / Server | Segment | Desktop / Server |
| -- | Predecessor | -- |
| -- | Successor | -- |
|
|
||
CPU Cores and Base FrequencyThe Intel Atom C2730 is a 8 core processor with a clock frequency of 1.70 GHz (2.40 GHz). The AMD Phenom II X2 511 has 2 CPU cores with a clock frequency of 3.40 GHz. |
||
| Intel Atom C2730 | Characteristic | AMD Phenom II X2 511 |
| 8 | Cores | 2 |
| 8 | Threads | 2 |
| normal | Core architecture | normal |
| No | Hyperthreading | No |
| No | Overclocking ? | Yes |
| 1.70 GHz | Frequency | 3.40 GHz |
| 2.40 GHz | Turbo Frequency (1 Core) | -- |
| 2.40 GHz | Turbo Frequency (All Cores) | -- |
Memory & PCIeThe Intel Atom C2730 supports a maximum of 32 GB of memory in 2 memory channels. The AMD Phenom II X2 511 can connect up to GB of memory in 2 memory channels. |
||
| Intel Atom C2730 | Characteristic | AMD Phenom II X2 511 |
| DDR3L-1600, DDR3-1600 | Memory | DDR3-1333, DDR2-1066 |
| 32 GB | Max. Memory | |
| 2 (Dual Channel) | Memory channels | 2 (Dual Channel) |
| 25.6 GB/s | Max. Bandwidth | 21.3 GB/s |
| Yes | ECC | No |
| -- | L2 Cache | -- |
| 4.00 MB | L3 Cache | 2.00 MB |
| 2.0 | PCIe version | -- |
| 8 | PCIe lanes | -- |
| 4.0 GB/s | PCIe Bandwidth | -- |
Thermal ManagementThe TDP (Thermal Design Power) of a processor specifies the required cooling solution. The Intel Atom C2730 has a TDP of 12 W, that of the AMD Phenom II X2 511 is 65 W. |
||
| Intel Atom C2730 | Characteristic | AMD Phenom II X2 511 |
| 12 W | TDP (PL1 / PBP) | 65 W |
| -- | TDP (PL2) | -- |
| -- | TDP up | -- |
| -- | TDP down | -- |
| -- | Tjunction max. | -- |
Technical detailsThe Intel Atom C2730 has a 4.00 MB cache, while the AMD Phenom II X2 511 cache has a total of 2.00 MB. |
||
| Intel Atom C2730 | Characteristic | AMD Phenom II X2 511 |
| 22 nm | Technology | 45 nm |
| Monolithic | Chip design | Unknown |
| x86-64 (64 bit) | Instruction set (ISA) | x86-64 (64 bit) |
| SSE4.1, SSE4.2 | ISA extensions | SSE3, SSE4a |
| BGA 1283 | Socket | AM3 |
| VT-x, VT-x EPT | Virtualization | AMD-V |
| Yes | AES-NI | No |
| Windows 10, Linux | Operating systems | Windows 10, Linux |
| Q3/2013 | Release date | Q1/2011 |
| 130 $ | Release price | -- |
| show more data | show more data | |
|
8C 8T @ 1.70 GHz (2.40 GHz) buy now on Amazon and save!
2C 2T @ 3.40 GHz buy now on Amazon and save!
|
||
Rate these processors
Average performance in benchmarks
⌀ Single core performance in 0 CPU benchmarks
⌀ Multi core performance in 1 CPU benchmarks
Cinebench R15 (Multi-Core)
Cinebench R15 is the successor of Cinebench 11.5 and is also based on the Cinema 4 Suite. Cinema 4 is a worldwide used software to create 3D forms. The multi-core test involves all CPU cores and taks a big advantage of hyperthreading.
|
Intel Atom C2730
8C 8T @ 2.40 GHz |
||
|
AMD Phenom II X2 511
2C 2T @ 3.40 GHz |
||
Estimated results for PassMark CPU Mark
Some of the CPUs listed below have been benchmarked by CPU-monkey. However the majority of CPUs have not been tested and the results have been estimated by a CPU-monkey’s secret proprietary formula. As such they do not accurately reflect the actual Passmark CPU mark values and are not endorsed by PassMark Software Pty Ltd.
|
|
Intel Atom C2730
8C 8T @ 2.40 GHz |
||
|
|
AMD Phenom II X2 511
2C 2T @ 3.40 GHz |
||
Cinebench R15 (Single-Core)
Cinebench R15 is the successor of Cinebench 11.5 and is also based on the Cinema 4 Suite. Cinema 4 is a worldwide used software to create 3D forms. The single-core test only uses one CPU core, the amount of cores or hyperthreading ability doesn't count.
|
|
Intel Atom C2730
8C 8T @ 2.40 GHz |
||
|
|
AMD Phenom II X2 511
2C 2T @ 3.40 GHz |
||
Devices using this processor |
|
| Intel Atom C2730 | AMD Phenom II X2 511 |
| Unknown | Unknown |
Popular comparisons containing this CPUs
back to index
