Intel Xeon E5-2608L v3 vs AMD Phenom II X4 910
Last updated:
CPU comparison with benchmarks
|
 |
|
| Intel Xeon E5-2608L v3 | AMD Phenom II X4 910 | |
CPU comparisonIntel Xeon E5-2608L v3 or AMD Phenom II X4 910 - which processor is faster? In this comparison we look at the differences and analyze which of these two CPUs is better. We compare the technical data and benchmark results.
The Intel Xeon E5-2608L v3 has 6 cores with 12 threads and clocks with a maximum frequency of 2.00 GHz. Up to 768 GB of memory is supported in 4 memory channels. The Intel Xeon E5-2608L v3 was released in Q3/2014. The AMD Phenom II X4 910 has 4 cores with 4 threads and clocks with a maximum frequency of 2.60 GHz. The CPU supports up to GB of memory in 2 memory channels. The AMD Phenom II X4 910 was released in Q1/2009. |
||
| Intel Xeon E5 (71) | Family | AMD Phenom II (52) |
| Intel Xeon E5 v3 (32) | CPU group | AMD Phenom II - 800/900 (23) |
| 5 | Generation | 4 |
| Haswell E | Architecture | Deneb (K10) |
| Desktop / Server | Segment | Desktop / Server |
| -- | Predecessor | -- |
| -- | Successor | -- |
|
|
||
CPU Cores and Base FrequencyThe Intel Xeon E5-2608L v3 is a 6 core processor with a clock frequency of 2.00 GHz. The AMD Phenom II X4 910 has 4 CPU cores with a clock frequency of 2.60 GHz. |
||
| Intel Xeon E5-2608L v3 | Characteristic | AMD Phenom II X4 910 |
| 6 | Cores | 4 |
| 12 | Threads | 4 |
| normal | Core architecture | normal |
| Yes | Hyperthreading | No |
| No | Overclocking ? | Yes |
| 2.00 GHz | Frequency | 2.60 GHz |
| -- | Turbo Frequency (1 Core) | -- |
| -- | Turbo Frequency (All Cores) | -- |
Memory & PCIeThe Intel Xeon E5-2608L v3 supports a maximum of 768 GB of memory in 4 memory channels. The AMD Phenom II X4 910 can connect up to GB of memory in 2 memory channels. |
||
| Intel Xeon E5-2608L v3 | Characteristic | AMD Phenom II X4 910 |
| DDR4-2133 | Memory | DDR3-1333, DDR2-1066 |
| 768 GB | Max. Memory | |
| 4 (Quad Channel) | Memory channels | 2 (Dual Channel) |
| 68.2 GB/s | Max. Bandwidth | 21.3 GB/s |
| Yes | ECC | No |
| -- | L2 Cache | -- |
| 15.00 MB | L3 Cache | 6.00 MB |
| 3.0 | PCIe version | -- |
| 40 | PCIe lanes | -- |
| 39.4 GB/s | PCIe Bandwidth | -- |
Thermal ManagementThe TDP (Thermal Design Power) of a processor specifies the required cooling solution. The Intel Xeon E5-2608L v3 has a TDP of 52 W, that of the AMD Phenom II X4 910 is 95 W. |
||
| Intel Xeon E5-2608L v3 | Characteristic | AMD Phenom II X4 910 |
| 52 W | TDP (PL1 / PBP) | 95 W |
| -- | TDP (PL2) | -- |
| -- | TDP up | -- |
| -- | TDP down | -- |
| -- | Tjunction max. | -- |
Technical detailsThe Intel Xeon E5-2608L v3 has a 15.00 MB cache, while the AMD Phenom II X4 910 cache has a total of 6.00 MB. |
||
| Intel Xeon E5-2608L v3 | Characteristic | AMD Phenom II X4 910 |
| 22 nm | Technology | 45 nm |
| Monolithic | Chip design | Unknown |
| x86-64 (64 bit) | Instruction set (ISA) | x86-64 (64 bit) |
| SSE4.1, SSE4.2, AVX2 | ISA extensions | SSE3, SSE4a |
| LGA 2011-3 | Socket | AM3 |
| VT-x, VT-x EPT, VT-d | Virtualization | AMD-V |
| Yes | AES-NI | No |
| Windows 10, Linux | Operating systems | Windows 10, Linux |
| Q3/2014 | Release date | Q1/2009 |
| -- | Release price | -- |
| show more data | show more data | |
|
6C 12T @ 2.00 GHz buy now on Amazon and save!
4C 4T @ 2.60 GHz buy now on Amazon and save!
|
||
Rate these processors
Average performance in benchmarks
⌀ Single core performance in 1 CPU benchmarks
⌀ Multi core performance in 2 CPU benchmarks
Estimated results for PassMark CPU Mark
Some of the CPUs listed below have been benchmarked by CPU-monkey. However the majority of CPUs have not been tested and the results have been estimated by a CPU-monkey’s secret proprietary formula. As such they do not accurately reflect the actual Passmark CPU mark values and are not endorsed by PassMark Software Pty Ltd.
|
Intel Xeon E5-2608L v3
6C 12T @ 2.00 GHz |
||
|
AMD Phenom II X4 910
4C 4T @ 2.60 GHz |
||
Cinebench R15 (Single-Core)
Cinebench R15 is the successor of Cinebench 11.5 and is also based on the Cinema 4 Suite. Cinema 4 is a worldwide used software to create 3D forms. The single-core test only uses one CPU core, the amount of cores or hyperthreading ability doesn't count.
|
|
Intel Xeon E5-2608L v3
6C 12T @ 2.00 GHz |
||
|
|
AMD Phenom II X4 910
4C 4T @ 2.60 GHz |
||
Cinebench R15 (Multi-Core)
Cinebench R15 is the successor of Cinebench 11.5 and is also based on the Cinema 4 Suite. Cinema 4 is a worldwide used software to create 3D forms. The multi-core test involves all CPU cores and taks a big advantage of hyperthreading.
|
|
Intel Xeon E5-2608L v3
6C 12T @ 2.00 GHz |
||
|
|
AMD Phenom II X4 910
4C 4T @ 2.60 GHz |
||
Devices using this processor |
|
| Intel Xeon E5-2608L v3 | AMD Phenom II X4 910 |
| Unknown | Unknown |
Popular comparisons containing this CPUs
back to index
