AMD EPYC 7F32 vs Intel Xeon E5-2620 v2
Last updated:
CPU comparison with benchmarks
|
 |
|
| AMD EPYC 7F32 | Intel Xeon E5-2620 v2 | |
CPU comparisonAMD EPYC 7F32 or Intel Xeon E5-2620 v2 - which processor is faster? In this comparison we look at the differences and analyze which of these two CPUs is better. We compare the technical data and benchmark results.
The AMD EPYC 7F32 has 8 cores with 16 threads and clocks with a maximum frequency of 3.90 GHz. Up to GB of memory is supported in 8 memory channels. The AMD EPYC 7F32 was released in Q2/2020. The Intel Xeon E5-2620 v2 has 6 cores with 12 threads and clocks with a maximum frequency of 2.60 GHz. The CPU supports up to 768 GB of memory in 4 memory channels. The Intel Xeon E5-2620 v2 was released in Q3/2013. |
||
| AMD EPYC (129) | Family | Intel Xeon E5 (71) |
| AMD EPYC 7002 (24) | CPU group | Intel Xeon E5 v2 (15) |
| 2 | Generation | 4 |
| Rome (Zen 2) | Architecture | Ivy Bridge EP |
| Desktop / Server | Segment | Desktop / Server |
| -- | Predecessor | -- |
| -- | Successor | -- |
|
|
||
CPU Cores and Base FrequencyThe AMD EPYC 7F32 has 8 CPU cores and can calculate 16 threads in parallel. The clock frequency of the AMD EPYC 7F32 is 3.70 GHz (3.90 GHz) while the Intel Xeon E5-2620 v2 has 6 CPU cores and 12 threads can calculate simultaneously. The clock frequency of the Intel Xeon E5-2620 v2 is at 2.10 GHz (2.60 GHz). |
||
| AMD EPYC 7F32 | Characteristic | Intel Xeon E5-2620 v2 |
| 8 | Cores | 6 |
| 16 | Threads | 12 |
| normal | Core architecture | normal |
| Yes | Hyperthreading | Yes |
| No | Overclocking ? | No |
| 3.70 GHz | Frequency | 2.10 GHz |
| 3.90 GHz | Turbo Frequency (1 Core) | 2.60 GHz |
| 3.80 GHz | Turbo Frequency (All Cores) | 2.30 GHz |
Memory & PCIeThe AMD EPYC 7F32 can use up to GB of memory in 8 memory channels. The maximum memory bandwidth is 51.2 GB/s. The Intel Xeon E5-2620 v2 supports up to 768 GB of memory in 4 memory channels and achieves a memory bandwidth of up to 51.2 GB/s. |
||
| AMD EPYC 7F32 | Characteristic | Intel Xeon E5-2620 v2 |
| DDR4-3200 | Memory | DDR3-1600 |
| Max. Memory | 768 GB | |
| 8 (Octa Channel) | Memory channels | 4 (Quad Channel) |
| 51.2 GB/s | Max. Bandwidth | 51.2 GB/s |
| Yes | ECC | Yes |
| -- | L2 Cache | -- |
| 128.00 MB | L3 Cache | 15.00 MB |
| 4.0 | PCIe version | 3.0 |
| 128 | PCIe lanes | 40 |
| 252.0 GB/s | PCIe Bandwidth | 39.4 GB/s |
Thermal ManagementThe thermal design power (TDP for short) of the AMD EPYC 7F32 is 180 W, while the Intel Xeon E5-2620 v2 has a TDP of 80 W. The TDP specifies the necessary cooling solution that is required to cool the processor sufficiently. |
||
| AMD EPYC 7F32 | Characteristic | Intel Xeon E5-2620 v2 |
| 180 W | TDP (PL1 / PBP) | 80 W |
| -- | TDP (PL2) | -- |
| -- | TDP up | -- |
| -- | TDP down | -- |
| -- | Tjunction max. | -- |
Technical detailsThe AMD EPYC 7F32 is manufactured in 7 nm and has 128.00 MB cache. The Intel Xeon E5-2620 v2 is manufactured in 22 nm and has a 15.00 MB cache. |
||
| AMD EPYC 7F32 | Characteristic | Intel Xeon E5-2620 v2 |
| 7 nm | Technology | 22 nm |
| Chiplet | Chip design | Monolithic |
| x86-64 (64 bit) | Instruction set (ISA) | x86-64 (64 bit) |
| SSE4a, SSE4.1, SSE4.2, AVX2, FMA3 | ISA extensions | SSE4.1, SSE4.2, AVX |
| SP3 | Socket | LGA 2011 |
| AMD-V, SVM | Virtualization | VT-x, VT-x EPT, VT-d |
| Yes | AES-NI | Yes |
| Windows 10, Linux | Operating systems | Windows 10, Linux |
| Q2/2020 | Release date | Q3/2013 |
| 2100 $ | Release price | 320 $ |
| show more data | show more data | |
8C 16T @ 3.70 GHz (3.90 GHz) buy now on Amazon and save!
6C 12T @ 2.10 GHz (2.60 GHz) buy now on Amazon and save!
|
||
Rate these processors
Average performance in benchmarks
⌀ Single core performance in 1 CPU benchmarks
⌀ Multi core performance in 2 CPU benchmarks
Geekbench 5, 64bit (Single-Core)
Geekbench 5 is a cross plattform benchmark that heavily uses the systems memory. A fast memory will push the result a lot. The single-core test only uses one CPU core, the amount of cores or hyperthreading ability doesn't count.
|
AMD EPYC 7F32
8C 16T @ 3.90 GHz |
||
|
Intel Xeon E5-2620 v2
6C 12T @ 2.60 GHz |
||
Geekbench 5, 64bit (Multi-Core)
Geekbench 5 is a cross plattform benchmark that heavily uses the systems memory. A fast memory will push the result a lot. The multi-core test involves all CPU cores and taks a big advantage of hyperthreading.
|
|
AMD EPYC 7F32
8C 16T @ 3.80 GHz |
||
|
|
Intel Xeon E5-2620 v2
6C 12T @ 2.30 GHz |
||
Estimated results for PassMark CPU Mark
Some of the CPUs listed below have been benchmarked by CPU-monkey. However the majority of CPUs have not been tested and the results have been estimated by a CPU-monkey’s secret proprietary formula. As such they do not accurately reflect the actual Passmark CPU mark values and are not endorsed by PassMark Software Pty Ltd.
|
|
AMD EPYC 7F32
8C 16T @ 3.80 GHz |
||
|
|
Intel Xeon E5-2620 v2
6C 12T @ 2.30 GHz |
||
Geekbench 6 (Single-Core)
Geekbench 6 is a benchmark for modern computers, notebooks and smartphones. What is new is an optimized utilization of newer CPU architectures, e.g. based on the big.LITTLE concept and combining CPU cores of different sizes. The single-core benchmark only evaluates the performance of the fastest CPU core, the number of CPU cores in a processor is irrelevant here.
|
|
AMD EPYC 7F32
8C 16T @ 3.90 GHz |
||
|
|
Intel Xeon E5-2620 v2
6C 12T @ 2.60 GHz |
||
Geekbench 6 (Multi-Core)
Geekbench 6 is a benchmark for modern computers, notebooks and smartphones. What is new is an optimized utilization of newer CPU architectures, e.g. based on the big.LITTLE concept and combining CPU cores of different sizes. The multi-core benchmark evaluates the performance of all of the processor's CPU cores. Virtual thread improvements such as AMD SMT or Intel's Hyper-Threading have a positive impact on the benchmark result.
|
|
AMD EPYC 7F32
8C 16T @ 3.80 GHz |
||
|
|
Intel Xeon E5-2620 v2
6C 12T @ 2.30 GHz |
||
Cinebench R20 (Single-Core)
Cinebench R20 is the successor of Cinebench R15 and is also based on the Cinema 4 Suite. Cinema 4 is a worldwide used software to create 3D forms. The single-core test only uses one CPU core, the amount of cores or hyperthreading ability doesn't count.
|
|
AMD EPYC 7F32
8C 16T @ 3.90 GHz |
||
|
|
Intel Xeon E5-2620 v2
6C 12T @ 2.60 GHz |
||
CPU-Z Benchmark 17 (Multi-Core)
The CPU-Z benchmark measures a processor's performance by measuring the time it takes the system to complete all benchmark calculations. The faster the benchmark is completed, the higher the score.
|
|
AMD EPYC 7F32
8C 16T @ 3.70 GHz |
||
|
|
Intel Xeon E5-2620 v2
6C 12T @ 2.10 GHz |
||
Cinebench R15 (Single-Core)
Cinebench R15 is the successor of Cinebench 11.5 and is also based on the Cinema 4 Suite. Cinema 4 is a worldwide used software to create 3D forms. The single-core test only uses one CPU core, the amount of cores or hyperthreading ability doesn't count.
|
|
AMD EPYC 7F32
8C 16T @ 3.90 GHz |
||
|
|
Intel Xeon E5-2620 v2
6C 12T @ 2.60 GHz |
||
Cinebench R15 (Multi-Core)
Cinebench R15 is the successor of Cinebench 11.5 and is also based on the Cinema 4 Suite. Cinema 4 is a worldwide used software to create 3D forms. The multi-core test involves all CPU cores and taks a big advantage of hyperthreading.
|
|
AMD EPYC 7F32
8C 16T @ 3.80 GHz |
||
|
|
Intel Xeon E5-2620 v2
6C 12T @ 2.30 GHz |
||
Devices using this processor |
|
| AMD EPYC 7F32 | Intel Xeon E5-2620 v2 |
| Unknown | Unknown |
Popular comparisons containing this CPUs
back to index
